Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Raasco Grips

NEW! - Holster Molds

We're now offering HDPE Split style holster molds, designed for holster builders. We cut these molds on a computer controlled router which allows us to offer numerous options so you can get the mold built to fit your needs. We design our molds with the use of 3d scans of the modeled gun. We then create a fully blocked mold that allows the gun to enter and exit the mold smoothly. We cut with a small diameter ball nose bit with a fine step over setting so the surface of these molds follow the curved surfaces of our models.

These molds are all cut to order and our lead time is currently about 2 weeks to get a mold cut and shipped.

We do not drill these molds for vacuum which should be done to produce the best vacuum forming results. This allows you to decide the best locations for your application. We recommend drilling 1/16" holes in all depressed and valley areas to avoic trapped air during vacuum.

We can also do custom mold variations and build custom trim jigs for use with these molds. The minimum custom revision charge is $75.  This can include entry flares, custom hole location markers, clip mount blocks, trigger guard retension depressions or tension blocks. Custom trim jigs start at $150 and can be cut based on an outline you provide. Many holster makers will order a set of four plates with two molds and two custom cutout jigs. Our cutout jigs have the same surface features as our molds so the formed kydex will align correctly with the jig.

sig-p365-mold-4.jpg

sig-p320-trim-2.jpg

 

NEW! - Holster Molds

We're now offering HDPE Split style holster molds, designed for holster builders. We cut these molds on a computer controlled router which allows us to offer numerous options so you can get the mold built to fit your needs. We design our molds with the use of 3d scans of the modeled gun. We then create a fully blocked mold that allows the gun to enter and exit the mold smoothly. We cut with a small diameter ball nose bit with a fine step over setting so the surface of these molds follow the curved surfaces of our models.

These molds are all cut to order and our lead time is currently about 2 weeks to get a mold cut and shipped.

We do not drill these molds for vacuum which should be done to produce the best vacuum forming results. This allows you to decide the best locations for your application. We recommend drilling 1/16" holes in all depressed and valley areas to avoic trapped air during vacuum.

We can also do custom mold variations and build custom trim jigs for use with these molds. The minimum custom revision charge is $75.  This can include entry flares, custom hole location markers, clip mount blocks, trigger guard retension depressions or tension blocks. Custom trim jigs start at $150 and can be cut based on an outline you provide. Many holster makers will order a set of four plates with two molds and two custom cutout jigs. Our cutout jigs have the same surface features as our molds so the formed kydex will align correctly with the jig.

sig-p365-mold-4.jpg

sig-p320-trim-2.jpg